Books : Search

1.

PCB Design for Real-World EMI Control (The Springer International Series in Engineering and Computer Science)
Author name: Bruce R. Archambeault, James Drewniak
2002-07

2.

Designing with decoupling capacitors: mount the decoupling capacitor on the side of the board with the smallest rectangular loop area to net the lowest ... from: Printed Circuit Design & Manufacture
Author name: Bruce Archambeault
April 20, 2007

3.

Effects of routing high-speed traces close to the PCB edge: to control emissions, high-speed signals should not be routed near the edge of the ground-reference ... from: Printed Circuit Design & Manufacture
Author name: Bruce Archambeault
January 22, 2008

4.

Eine Arche voller Tiere.
Author name: Bruce R. Archambeault
September 30, 2004

5.

EMC effects from the hidden schematic: smart designs consider the return current path to ensure EMI/EMC performance.(EMC FOR THE REAL WORLD): An article from: Printed Circuit Design & Manufacture
Author name: Bruce Archambeault
January 30, 2007

6.

EMI/EMC Computational Modeling Handbook (2nd Edition) (The Springer International Series in Engineering and Computer Science)
Author name: Bruce R. Archambeault, Omar M. Ramahi, Colin Brench
August 15, 2001

7.

Modeling common ground noise in high-speed multi-board PCB systems: the amount of noise between reference planes in two adjoining boards depends on the ... article from: Printed Circuit Design & Fab
Author name: Mosin Mondal, Bhyrav Mutnur, Pravin Patel, Samuel Connor, Bruce Archambeault, Moises Cases
November 04, 2008

8.

Resistive vs. inductive return current paths: at high frequencies the return current follows the path of least inductance, not the path of least resistance.(EMC ... article from: Printed Circuit Design & Fab
Author name: Bruce Archambeault
November 04, 2008

9.

Software simulation tools for EMC control of high-speed signals: using multiple simulation techniques and tools improves modeling validity.(SIMULATION ... from: Printed Circuit Design & Manufacture
Author name: Bruce Archambeault
May 22, 2007

10.

What is inductance? A closed loop creates inductance, so control your signal path by minimizing the loop area.(EMC FOR THE REAL WORLD): An article from: Printed Circuit Design & Fab
Author name: Bruce Archambeault
November 04, 2008